Novation Remote SL37 - jak nastavit Transpozici?

MIDI Master keyboardy, syntezátory, digitální piána, varhany... a příslušenství
Odpovědět
Uživatelský avatar
upman
Příspěvky: 1587
Registrován: 08 zář 2004 16:29
Vybavení

Novation Remote SL37 - jak nastavit Transpozici?

Příspěvek od upman » 10 čer 2008 13:20

Zdravim,

vcera sem se fakt lamal, dokonce hledal i v manualu, ale nikde nemuzu najit, jak nastavit transpozici, standardne na GEMu zmacknu tlacitko Transpose a zadam si +/- X pultonu.

Jak na to? Pro me fakt sakra dulezita vec....

Diky
Mac mini, Logic 9, MOTU Ultralite, PadKontrol, Novation SL37, IK VSTs
http://bandzone.cz/lifelies

Uživatelský avatar
upman
Příspěvky: 1587
Registrován: 08 zář 2004 16:29
Vybavení

Příspěvek od upman » 10 čer 2008 13:34

Aha, uz bylo pozde v noci, ted sem to nasel :)

How do I transpose on the SL?
There is 2 ways to transpose with the SL. The first is to transpose globally, this means the transposition applies to all the templates. First you'll need to press 'template' twice, then set Zones to 'global'. Now press 'global' twice, set Zones to 'On'. Now all 4 zones are turned on. So you'll need to turn off the other 3 zones. Therefore go to zone 2, 3, 4 and set these Ports to 'OFF'. Only zone 1 is being transmitted now. You can now adjust the transposition and velocity curve. Make sure the low note is set to C-2 and high note is set to G8 to tranpose the entire range and that it is output to the correct ports.

The second method is to transpose only for certain template. Select the template you want. Double press the global button and make sure zones is set to off. Now double press the template button and set zones to 'ON'. Again, all 4 zones are turned on. So you'll need to turn off the other 3 zones. Therefore go to zone 2, 3, 4 and set these Ports to 'OFF'. Only zone 1 is being transmitted now. You are now free to assign transpose and velocity curve for this template. Again make sure the low note is set to C-2 and high note is set to G8 to tranpose the entire range and is output to the correct ports.

Hopefully, it should be clear by now, you can set up zones globally and for specific template by adjusting the low and high note in each zone and what ports these message are sent out to, as well as the transposition and velocity curve of each zone.
Mac mini, Logic 9, MOTU Ultralite, PadKontrol, Novation SL37, IK VSTs
http://bandzone.cz/lifelies

Odpovědět